• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Oil change on wet slip, in water.

Change on water or not

  • Yes

    Votes: 6 85.7%
  • No

    Votes: 1 14.3%

  • Total voters
    7

Daniel 2018 AR190

Active Member
Messages
9
Reaction score
5
Points
42
Location
Houston
Boat Make
Yamaha
Year
2018
Boat Model
AR
Boat Length
19
Has anyone ever changed the oil on the wet slip while the boat was in the water? Just wondering how level it would be and if I can pump all the oil out while it's rocking a little. Any issues with doing this way? I figure it's already on water so I can warm it up and not have to take it in and out.
 

Attachments

  • 20180429_192301.jpg
    20180429_192301.jpg
    1.7 MB · Views: 11
we've had many members do it, just put in what you take out,
 
I'm planning on doing this later this week - here's my checklist so I don't get out there and not have everything I need.

-Oil & Filters
-Oil Extractor
-used oil basin of some sort (not sure if im daring enough to pour the used oil back into quart sized containers on the boat)
-Oil Filter Wrench
-bottom half of plastic gallon jub (to be used as a catch can when removing filter)
-lots of rags & paper towels
-cleaning spray to avoid problems with wife
-funnel
-beer

And for my 10 hour
-Grease gun
-Channel locks/vise grips (in the event the zerk holds on too tight)
-new yamaha grease cartridge
 
I'm planning on doing this later this week - here's my checklist so I don't get out there and not have everything I need.

-Oil & Filters
-Oil Extractor
-used oil basin of some sort (not sure if im daring enough to pour the used oil back into quart sized containers on the boat)
-Oil Filter Wrench
-bottom half of plastic gallon jub (to be used as a catch can when removing filter)
-lots of rags & paper towels
-cleaning spray to avoid problems with wife
-funnel
-beer

And for my 10 hour
-Grease gun
-Channel locks/vise grips (in the event the zerk holds on too tight)
-new yamaha grease cartridge
I’ve never used a milk jug. That might work. I put a large puppy pad under the filter, which works great. Covers a lot of area. Know how much grease you plan to put in. Mine required 30 CC’s, which for my gun was 30 pumps. Some folks do less, some don’t do anything. Also know it’s not one of those deals where you pump until old grease comes out. Beer should be at the top of the list by the way. Cheers!
 
Back
Top