Boat Stuff Parting out 1999 LS2000

[mb300sd]

My LS2000 was the victim of a hit and run last year that sent it off the trailer and sliding along the road. I'm parting her out now, need the parking spot for my new AR230.

 

[smthng]

Sadness.

Does the throttle stay in place without having to hold it? If so, I might be interested in the whole assembly if you're interested in pulling it out or giving me twenty minutes of screwdriver time. Where's it located?

 

[mb300sd]

Sadness.

Does the throttle stay in place without having to hold it? If so, I might be interested in the whole assembly if you're interested in pulling it out or giving me twenty minutes of screwdriver time. Where's it located?

I have a Morse 4 lever installed that I'm keeping to put in my new boat. The factory shift lever was completely seized up from corrosion.

 

[JC6275]

If the glovebox assembly is in nice contition i am interested in it, also interested in the Gauge cluster

 

[mb300sd]

If the glovebox assembly is in nice contition i am interested in it, also interested in the Gauge cluster

Sorry, already sold both of those.

 

[Scottintexas]

@4x15mph not sure if you're in need of anything

 

[Kallie lucas]

If you would like to sell the windshield storage cover / horn cover I would be interested. If they are both in good condition!

 

[Scottintexas]

Sadness.

Does the throttle stay in place without having to hold it? If so, I might be interested in the whole assembly if you're interested in pulling it out or giving me twenty minutes of screwdriver time. Where's it located?

@smthng are you having problems with your throttles? you know we have an good fix for that in the FAQ https://jetboaters.net/faq/how-to-stop-your-throttles-from-slipping-back-adjustments.44/

 

[4x15mph]

@mb300sd , do you have the rear swim platform plastic covers that go over the hinges for the platform? PM'd you with more details

 

[mb300sd]

@mb300sd , do you have the rear swim platform plastic covers that go over the hinges for the platform? PM'd you with more details

I'm not sure what part you're talking about, do you have pictures? I never got a PM and can't get to the boat for a day or 2.

 

[4x15mph]

Thank you. See the item circled in red here. I could use either/both sides if you have them:

 

[mb300sd]

Thank you. See the item circled in red here. I could use either/both sides if you have them:

Starboard looks ok, port is cracked. Make me an offer.

 

[Bruce]

@mb300sd, did you see that @Kallie lucas is asking about the windshields?

 

[mb300sd]

@mb300sd, did you see that @Kallie lucas is asking about the windshields?

Windshields are already sold, sorry.

 

[Rolexservice]

My LS2000 was the victim of a hit and run last year that sent it off the trailer and sliding along the road. I'm parting her out now, need the parking spot for my new AR230.



















Hello does the boat still have the cleanout ports intact? I am interested in how the factory installed them as mine are both leaking and I need to seal them. Parts diagrams show possible fasteners at 4 corners but I don't see any. I'm wondering if there are fasteners but the factory fiberglassed over them after installation. I would maybe be interested in the ports and the plugs if you still have them. Or if anyone else knows if there are fasteners or how these can come out. (The actual port that is sealed in the hull) I don't want to just seal the edges I want to reseal the whole fixture but need to remove first. Thank you

 

[Kathy]

Do you have any of the cup holders speaker covers

 

[GeniusGio]

is the fuel gauge available and in good shape?

How about the speedometer? Thanks

 

[mb300sd]

Cup holders are gone and speakers are not factory.

Fuel gauge and speedometer are available, but also not original.

 

[GeniusGio]

That's cool, what brand ( model is the fuel guage ) and what price plus shipping to Miami FL?

 

[Kathy]

Do you have the ski locker hatch with hinge?
Motor(s) ? How many hours did you have on it - turns out I have one cylinder half dead on mine.