Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

General Discussion

Picture of pumps out of the water at speed

Thread starter Scottie
Start date Jun 25, 2018

Scottie

Jetboaters Captain

Jun 25, 2018

#1

Can anyone find the picture that shows the pumps out of the water at speed? The one I saw was a twin engine, but I can't find it now. I think it was @swatski or maybe @JetBoatPilot that posted the first one I saw. Thanks!

THE 2013 212x

Performance:
Ribbon/snorkle delete; blower upgrade (2x spal fans); L13 cones; 6CW impellers; delrin wear rings;
Electrical/electronics:
RideSteady/Hydrophase GPS Speed Control; 150A Helm Aux 12V Circuit w/fused panel; Onboard NOCO 2-bank charger w/NOCO Outlet; LED nav light; wired LED tow point anchor light; Triple RGB transom light; 4 zone interior RGB LED lighting; One-Off custom dash cap and instrument panel with flushmount SIMRAD Go7 and temperature gauges for each engine. Custom lower switch panel for lighting w/ Blue Sea voltmeter; Custom blue rocker switches on Blue Sea dimmer; Relocated no wake mode switch to throttles; Relocated battery switch to custom enclosure for easy access; Push-button start kit from @mainah;
Audio:
Sony DSX-M80 w/ wired swimdeck remote; 6x JL mx650; 6x 10" subwoofers JL M1IB5; 4x JL 770 tower speakers; 3 JL marine amps (2x m600/1 and 1 m800/8v2);
Handling:
Throttlesync; Cobra Steering; JBP lateral thrusters;
Wake:
WakeWedge; Custom swimdeck bag from @jcyamaharider; 3x 800lbs fully integrated ballast; Quick connect auxilliary fill port; 4x Jabsco Ballast King pumps. 4x 1" thru hull intakes. 3200 lbs of ballast in 6 minutes or less.
Cabin/Hull/Misc:
EZ locks; additional factory cleats; bow/ladder grab handles; gas strut and slam latch for anchor locker; Gem Products stainless latches throughout; longer gas strut for ski locker (opens fully); Mini strut for passenger glove box; Garelick hydraulic seat post; BolsterBuddy; Seadek Full Set w/ custom/extra Pcs; Yamaha swivel board rack w/ custom fork; Premium Yamaha Cover; Hangtyte System; Billet bilge/bypass fittings; Stainless scupper; Fortress FX-7 anchor modified to fit factory locker;

Scottie

Jetboaters Captain

Jun 25, 2018

#2

Found it! Photo credit @Williamsone46

Last edited: Jun 25, 2018

THE 2013 212x

Performance:
Ribbon/snorkle delete; blower upgrade (2x spal fans); L13 cones; 6CW impellers; delrin wear rings;
Electrical/electronics:
RideSteady/Hydrophase GPS Speed Control; 150A Helm Aux 12V Circuit w/fused panel; Onboard NOCO 2-bank charger w/NOCO Outlet; LED nav light; wired LED tow point anchor light; Triple RGB transom light; 4 zone interior RGB LED lighting; One-Off custom dash cap and instrument panel with flushmount SIMRAD Go7 and temperature gauges for each engine. Custom lower switch panel for lighting w/ Blue Sea voltmeter; Custom blue rocker switches on Blue Sea dimmer; Relocated no wake mode switch to throttles; Relocated battery switch to custom enclosure for easy access; Push-button start kit from @mainah;
Audio:
Sony DSX-M80 w/ wired swimdeck remote; 6x JL mx650; 6x 10" subwoofers JL M1IB5; 4x JL 770 tower speakers; 3 JL marine amps (2x m600/1 and 1 m800/8v2);
Handling:
Throttlesync; Cobra Steering; JBP lateral thrusters;
Wake:
WakeWedge; Custom swimdeck bag from @jcyamaharider; 3x 800lbs fully integrated ballast; Quick connect auxilliary fill port; 4x Jabsco Ballast King pumps. 4x 1" thru hull intakes. 3200 lbs of ballast in 6 minutes or less.
Cabin/Hull/Misc:
EZ locks; additional factory cleats; bow/ladder grab handles; gas strut and slam latch for anchor locker; Gem Products stainless latches throughout; longer gas strut for ski locker (opens fully); Mini strut for passenger glove box; Garelick hydraulic seat post; BolsterBuddy; Seadek Full Set w/ custom/extra Pcs; Yamaha swivel board rack w/ custom fork; Premium Yamaha Cover; Hangtyte System; Billet bilge/bypass fittings; Stainless scupper; Fortress FX-7 anchor modified to fit factory locker;

ruztew

Jetboaters Lieutenant

Jun 26, 2018

#3

Here's a video that jetboatpilot made showing the same thing

You must log in or register to reply here.

Similar threads

Anyone have a picture from above of a the bow of a 2010-14 240/242 vs a 2015+ 240/242?

Replies: 0

Views: 289

Jul 9, 2024

zelone

J

Top Speed Drop

Replies: 8

Views: 245

Feb 17, 2025

jcb1977

J

R

Jet Outboard Pump Suppliers

Replies: 1

Views: 514

Jan 4, 2025

rpmlou

R

R

I keep having to take out mangled fish from the cleanout ports

Replies: 13

Views: 878

Aug 23, 2024

AZMark

05 AR230 H.O port engine start issue / power

Replies: 10

Views: 478

Sep 3, 2024

euro_e30

Share:

Facebook X (Twitter) LinkedIn Reddit Pinterest Tumblr WhatsApp Email Link

General Discussion

Top