• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Putting vents in battery/aft portside storage

scokill

Jetboaters Admiral
Messages
1,585
Reaction score
1,195
Points
272
Location
Rowlett, TX
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
So I'm considering cutting some vent holes in the battery storage compartment to provide some ventilation to that area as my sub and amp are in there. I've never had any problems but there always "that" smell in there (you know what I'm talking about) and there is really no ventilation in any storage area. I was thinking something like these:

https://www.westmarine.com/buy/west-marine--louvered-ventilators--P000282320?recordNum=11

Bad idea? Has anybody done anything similar?
 
In my '07 SX230 I never had the smell but my sniffer doesn't work all that well. The '07 had a small vent just forward of the port flushing connector but probably to small to help the sub-woofer. I have seen people put vents in to help their sub-woofers breathe better and done right it looks factory.
 
In my '07 SX230 I never had the smell but my sniffer doesn't work all that well. The '07 had a small vent just forward of the port flushing connector but probably to small to help the sub-woofer. I have seen people put vents in to help their sub-woofers breathe better and done right it looks factory.

Maybe the smell is the "old boat" smell :) You don't have that problem with the 2016 Cobalt :)
 
Back
Top