Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Has anyone had any luck using the method outlined in the service manual to read fault codes with the info center? I get a check engine notification on startup, for both port and starboard engines, but following this method provides no "Fault Code" function to choose in the results. Am I doing something wrong? Is the manual missing a step? I have the engine running when performing these steps. Thank you!
I have not myself, but it was recommended to get the candoo to read codes and much more!
Scarab Mike put a topic on it here.
A friend has it and loves it.
If you want to make your life easier, yes. Either one is 400. The CanDoo Pro will do other engines besides BRP Rotax. I believe the BRP BUDS might read more info but cannot confirm that. Like I mentioned the CanDoo works great for me. @ScarabMike did a write-up on it. Explains how to use it.
