• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Reborn rack and Versa/zup

tabbibus

Jetboaters Admiral
Messages
2,516
Reaction score
4,318
Points
317
Location
Lake Lanier, GA
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
Any one with the Reborn kneeboard wakeboard rack know if a versa board will fit. It is very similar to a Zup board.

Thanks
 
I have that rack. I know nothing about those boards, but i could measure. i have a fat ass knee board that fits. fat as in tall top to bottom. anything longer front to back would be tough i think. just based on how the knee board sits with the bungee.
 
@tabbibus I use their surfboard rack for my Zup if that helps.

 
Yeah. I saw that as well. But I also have a wakeboard. Trying. Not to buy two racks. Lol.
 
I have that rack and board. Yes it fits great and I recommend it. Only issue is that the bungee is NOT long enough to fit around that extra wide Versa board and back onto the rack. Instead I have to find someplace else to attach the bungee, either on the tower or via a second bungee extension.

I did get the bungee to stretch one time around that board and then secure onto the rack, but it was so tight that when I went to release it it slipped out of my hands and smacked me hard across the face. I had red lines on my forehead for a week and lost my sunglasses into the lake.

Other knee boards and surfboards fit just fine with the bungee, it’s just that the versa board is so wide (I think mine is about 27 inches).

I don’t have a picture handy but will try to get one. I recommend you get it with the rotating clamp, otherwise it can get a little bit in the way when putting on the factory cover since it hangs over the tower Velcro and ratchet clips.
 
Pics from today with Versa on 19’ tower. Since the foot straps are installed I hooked the bungee around that, holds it fine for inland lake use.
 

Attachments

  • 8C9C9668-936F-45B5-8CE7-4585AA07A7FE.jpeg
    8C9C9668-936F-45B5-8CE7-4585AA07A7FE.jpeg
    286.7 KB · Views: 43
  • AC242E30-9617-4F43-B628-6F3949AAF459.jpeg
    AC242E30-9617-4F43-B628-6F3949AAF459.jpeg
    289.6 KB · Views: 43
  • 79D44667-AE89-4325-AA5C-9825C74F5CE5.jpeg
    79D44667-AE89-4325-AA5C-9825C74F5CE5.jpeg
    288.7 KB · Views: 46
  • D6D60D73-40C2-4755-AACB-3F849EFE1BDC.jpeg
    D6D60D73-40C2-4755-AACB-3F849EFE1BDC.jpeg
    343.8 KB · Views: 46
Back
Top