weaselman
Jet Boat Junkie
- Messages
- 154
- Reaction score
- 119
- Points
- 142
- Location
- Waterford, CT
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- Limited S
- Boat Length
- 24
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Removal of Connection Cord from Tower Pin
- Thread starter weaselman
- Start date
Gym
Jetboaters Admiral
- Messages
- 3,258
- Reaction score
- 2,661
- Points
- 352
- Location
- Falmouth, MA (Cape Cod)
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 23
Or cut it using a utility knife.
weaselman
Jet Boat Junkie
- Messages
- 154
- Reaction score
- 119
- Points
- 142
- Location
- Waterford, CT
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- Limited S
- Boat Length
- 24
I ended up cutting it off but would like to replace with new ones. Just don't know how to put the new one on.
haknslash
Jetboaters Fleet Admiral
- Messages
- 7,585
- Reaction score
- 9,030
- Points
- 567
- Location
- Lake Martin, AL
- Boat Make
- Moomba
- Year
- 2019
- Boat Model
- Other
- Boat Length
- 23
Looks like there's a roll pin holding the plastic handle on the machined part. Can you see the roll pin from both sides of the handle? If so perhaps push the roll pin out, handle should slide off then, replace new plastic retaining cable, slide handle back on and align with roll pin holes, insert roll pin (it will be tight) = profit?
Last edited:
