• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Removing a bees nest

mraz72

Jetboaters Commander
Messages
823
Reaction score
310
Points
177
Location
Rochester, NY
Boat Make
Yamaha
Year
2016
Boat Model
242X E-Series
Boat Length
24
So I think I have a small nest or something inside of my wake tower. I see wasps entering from the bottom of the tower, the fold hinge area. Any ideas on the best way to get rid of them?

I'm thinking
1. Some sort of gas so it gets where it needs to get to. Problem is my boat is wetslipped, I don't want to poison neighbors.
2. unfold the tower, spray the wasp killer that travels 30 feet in a stream and hope I hit the nest.
3. run a snake up the tube and try to hit the nest.

none sound like fun and I don't have any equipment to keep me from getting stung.

I could call an exterminator, probably costs $200 - $300.

So many better things to spend money on.....
 
The stuff the Orkin guy used on a nest I had way up on the house peak worked well. Not sure what it is. Basically they hit the opening and it doesn't kill them right away, they drag it into the nest and then it kills them off.

I kept shooting the intsa kill foam stuff but they kept coming back through other entrance ways.
 
I deal with those suckers all the time, to the point I have strategically placed cans of WASP killer spray around my property.
One bit of advice, whatever you plan on doing, do it at night when they are sleeping/resting/less active. During the day they might not all be in the nest and they are crazy aggressive. I kill/remove my nests at night to avoid getting stung. Spray, run and wait it out till the AM to make sure they are gone.
 
If you know where the only entrance/exit is, simply apply some residual insecticide (indoor rated Ortho Home Defense); spray it around the opening. As they come and go, they will all die - it will take a day or two. After they are dead, rinse the area and remove the nest to prevent new hatchlings.
 
I get the concern about not wanting to mess with your neighbors with gas or risking a sting fest without gear. Calling an exterminator sounds like a surefire fix, though it can dent your wallet. If you're up for a DIY approach, unfolding the tower and hitting them with a long-reaching spray might do the trick, but watch out for those stings! Another idea could be running a snake up the tube, though that sounds a bit risky without proper gear. If you're keen on prevention, I found some tips on how to keep bees away.
 
Last edited:
Is it possible to just plug the hole(s) and just let them die off inside the tube? Back in the day we used steel wool for the plug(s).
 
Back
Top