Vito Aiello
Jet Boat Lover
- Messages
- 59
- Reaction score
- 17
- Points
- 67
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- AR
- Boat Length
- 19
Does anyone have an idea how to remove the driver seat. I'm installing my sea dek. Thanks
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Removing driver seat to install sea dek
- Thread starter Vito Aiello
- Start date
ThatJeepGuy
Jetboaters Captain
- Messages
- 497
- Reaction score
- 723
- Points
- 222
- Location
- Brooksville Florida
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 24
Just turn the lever to slide the seat forward (or swivel, I can't remember) then just pull up. I use to pull the seat every time I'd wash the boat and clean under it. It's also useful when trying to dry the seat and making sure all the water is out of the seat.
Vito Aiello
Jet Boat Lover
- Messages
- 59
- Reaction score
- 17
- Points
- 67
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- AR
- Boat Length
- 19
Thanks, I'll give it a try
Zeus2013
Jetboaters Captain
- Messages
- 617
- Reaction score
- 328
- Points
- 212
- Location
- Farmingdale, NY
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- SX
- Boat Length
- 24
I have to turn mine 45 degrees outwards then pull up. Goes back the same way.
Eric Ballard
Jetboaters Commander
- Messages
- 811
- Reaction score
- 961
- Points
- 187
- Location
- Clayton, NC
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- SX
- Boat Length
- 19
You may have to swivel a little and then also slide back back and forth too at the same time; that's what I had to do.
BE CAREFUL if you turn the removed seat upside down and move the seat slide or swivel. there is a spring in there that can come out and it's a *itch to get back in.
BE CAREFUL if you turn the removed seat upside down and move the seat slide or swivel. there is a spring in there that can come out and it's a *itch to get back in.
Eric Ballard
Jetboaters Commander
- Messages
- 811
- Reaction score
- 961
- Points
- 187
- Location
- Clayton, NC
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- SX
- Boat Length
- 19
Just following up on this. If you remove the seat and adjust the seat lever the spring will more than likely all out. If you this happens to you see below.
The first image shows all the things you have to remove. Then slide the slider seat piece to the front and about half way off the slider base. This will expose the location of the spring. The second image shows what the spring looks like when installed properly.
The first image shows all the things you have to remove. Then slide the slider seat piece to the front and about half way off the slider base. This will expose the location of the spring. The second image shows what the spring looks like when installed properly.
Similar threads
