4x15mph
Jetboaters Admiral
- Messages
- 1,845
- Reaction score
- 1,077
- Points
- 282
- Location
- Downingtown, PA
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- AR
- Boat Length
- 21
I used the following 3M product and I let it sit for a couple of hours. Pour on and go to the gym.
I then used a razor and pushed in from both sides of the caulked area. I pulled on this and also ran along it with a plastic scraper. I don't know what type of caulk I removed but there was already caulk in the gaps. I left it as is and I can always go back and caulk the seams again but I don't think I need to. I cleaned up the area with Goo gone and the magic eraser. This was a huge improvement not having moldy caulk
I then used a razor and pushed in from both sides of the caulked area. I pulled on this and also ran along it with a plastic scraper. I don't know what type of caulk I removed but there was already caulk in the gaps. I left it as is and I can always go back and caulk the seams again but I don't think I need to. I cleaned up the area with Goo gone and the magic eraser. This was a huge improvement not having moldy caulk
