Replacement rocker switches

[JC6275]

I have lost a couple of the switch covers on my LS2000, need some replacement switches. I need radio, blower, and bilge switches. Anyone know where I can find these? Or if anyone has replaced theirs what switches did you use. Thanks all!!

 

[ToddW850]

Just went through and replaced all of mine due to fading. The new ones look great. Got mine from here https://www.pacergroup.net/switch-covers/

 

[addisonm06]

New Marine also sells them for about $4.99 a piece.
https://newwiremarine.com/product-category/contura-ii-printed-switch-covers/

 

[4x15mph]

Great post - my rockers dont have any labels so these will be great. Do they just snap on/off?

 

[addisonm06]

Yup they snap on/off. They do make a rocker removal tool to aid with removal.

 

[JC6275]

I just ordered all 6 new covers. They even have some novelty covers too!!! Thanks for the info

 

[addisonm06]

Anytime!! Please share some photos when you get them on!

 

[Jgorm]

I'm in

 

[addisonm06]

Hahah I think that would be one way to confuse to next owner

 

[rtucker11]

I need at least 1, but would prefer to replace both the no wake switches and covers on my 2008 AR 230. Yamaha F1C-U8311-00-00 - Superseded by F1C-U8311-01-00 - SWITCH, PUSH (NO WAK | Partzilla.com appears to the stock. Can I get a cheaper momentary rocker switch replacement at any of the above links or amazon? Thanks!

 

[rtucker11]

(ON)-OFF Rocker Switch | Waterproof | Carling Contura II | Momentary would work?

 

[MrHollywood512]

New Marine also sells them for about $4.99 a piece.
Contura II Printed Rocker Switch Covers | Boat Actuators | New Wire Marine

Just bought 6 new switches and the tool. Thx for the info!

 

[rtucker11]

The no wake switches are "Special". They're normally open momentary rockers but have a 4.7Kohm resister. I haven't installed one to be 100% sure, however I'm seeing the same readings using my meter on my homemade.

 

[cruisepro2]

I just bought a 202 Yamaha LS200 and don't know which ones to order since they are all missing. Can anyone show me how to identify what they are so I can order the right ones? Also, can't get the clean out ports open! One is even missing the unlock button!

 

[UnorthodoxCreations]

I just bought a 202 Yamaha LS200 and don't know which ones to order since they are all missing. Can anyone show me how to identify what they are so I can order the right ones? Also, can't get the clean out ports open! One is even missing the unlock button!

Here you go. This is my 1999.

 

[cruisepro2]

Thanks very much!

 

[acorn2626]

Here you go. This is my 1999.View attachment 124242View attachment 124243

How did you refinish your dash? Is that hydro dipped?

 

[UnorthodoxCreations]

How did you refinish your dash? Is that hydro dipped?

As far as I know that is the factory finish. The boat was like that when I bought it.

 

[Jeep7797]

Yep, factory. My 2000 ls2000 is the same.

 

[84rzv500r]

Interesting placement of the temp gauges... thats right where I planned on boring the holes for the mechanical oil pressure gauges for my MR-1's