• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

reverse gate

cxr133

Jet Boat Lover
Messages
18
Reaction score
4
Points
82
Boat Make
Yamaha
Year
2005
Boat Model
SX
Boat Length
23
full



what year boat is this reverse gate off? broke an ear off one of mine and need to replace I would put this one if it fits my 05
 
That’s the newer gen gate. I can’t recall what year but different from your smooth aluminum ‘05 in construction. I suspect it will still work (no real geometry changes, just a different form) but it would look different.
 
It's not from a 2007-2009 xx230 series boat either, because my gate does not look like that.
 
Yours is an aluminum older style gate, however if you try to order one you will get the newer style plastic gate as shown because they do no carry the older one and if you do not change the standoffs in the newer gate where it pivots on the bolts the older ones were shorter so the gate will drag or hang up, the new gate standoff part number is 90387-08m30-00 and you will need 2 of those per gate obviously.
 
Last edited:
Back
Top