dan_hoog
Jet Boat Lover
- Messages
- 17
- Reaction score
- 17
- Points
- 72
- Location
- Vero Beach, FL
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- Limited S
- Boat Length
- 24
I had my engine / mechanical stuff treated with t-9 a couple times since purchase. I've heard several people suggest rinsing the engine area.
What is the process I should use? Would it just be low pressure flow right over the engine? I'm just not sure where to run water or what to avoid, so I've left it alone. Everything looks fine, but I suspect it needs it by now. I boat in salt water and store on a lift. It seems I should rinse and reapply either t-9 or crc heavy duty corrosion protection.
Any advice or comments would be appreciated.
Best,
Dan
What is the process I should use? Would it just be low pressure flow right over the engine? I'm just not sure where to run water or what to avoid, so I've left it alone. Everything looks fine, but I suspect it needs it by now. I boat in salt water and store on a lift. It seems I should rinse and reapply either t-9 or crc heavy duty corrosion protection.
Any advice or comments would be appreciated.
Best,
Dan