SeaDek Orientation

[TimW451]

I’m getting my last piece of SeaDek in at the pilot’s seat and I can see this going either of the two possible ways. I’m definitely lining up the “seams” either way. I have a preference, but want the opinion of the masses.

Orientation A

Orientation B

 

[CigarJeff68]

I like orientation B, covers the snap and looks cleaner.

 

[Babin Farms]

I'd go with B. Your not going to notice the absence of coverage to the right of the helm & both lines on the left edge line up. In A they do not.

 

[HangOutdoors]

I personally would go with "A". There is more width to the first panel, plus that edge is a high Use area with feet. Remove the snap, I removed all of mine. Fill with the gel coat repair patch, light sand buff and done. You will never know the snap was there. On all of my covered snaps I filled them all in with Gel Coat Patch and sanded and buffed them before putting down the sea deck. Probably overkill.

 

[King]

I'm for "B". The last stripes to the left look to line up in a more aesthetically pleasing way with the ones on the floor and locker door.

That's my $0.02 worth.

 

[BenjaminF]

I'd go with B too.

 

[NewGuy]

B

 

[Crob83]

B

 

[HangOutdoors]

Ok after eye balling it a few times, I will change to "B" it looks better.

 

[Dixemon]

Take the snap out and center it up is my vote.

 

[Bluewater272]

B, for sure. Take a picture of both setups standing up and looking at it with the seat and wheel in the way - outside of this vantage point no one will see the minor gap on the left.

 

[Huv1]

B is the one.

 

[Jerlane]

"B" for the win!

 

[anjboyer]

B.... It catches the eye first.

 

[TimW451]

Orientation B wins!