Seadek

[bks223]

Hello,
We have a 2017 AR195 and we have a little piece of seadek on the rear deck that is coming up from the middle.. Its still tacked down all along the outside.
Does anyone know best way to apply adhesive to get it all the way tacked back down?
I was going to just maybe pull up one edge and apply adhesive, but wasnt sure if that was best way or not.

Any suggestions on best adhesive to use??

Thanks in advance..

 

[Julian]

@JetBoatPilot is our seadek expert

 

[HangOutdoors]

Hello,
We have a 2017 AR195 and we have a little piece of seadek on the rear deck that is coming up from the middle.. Its still tacked down all along the outside.
Does anyone know best way to apply adhesive to get it all the way tacked back down?
I was going to just maybe pull up one edge and apply adhesive, but wasnt sure if that was best way or not.

Any suggestions on best adhesive to use??

Thanks in advance..

Cut atiny slit in a seam and then use a syringe with 3M liquid adhesive. The slit also lets the air pocket out.

 

[JetBoatPilot]

Hello,
We have a 2017 AR195 and we have a little piece of seadek on the rear deck that is coming up from the middle.. Its still tacked down all along the outside.
Does anyone know best way to apply adhesive to get it all the way tacked back down?
I was going to just maybe pull up one edge and apply adhesive, but wasnt sure if that was best way or not.

Any suggestions on best adhesive to use??

Thanks in advance..

We're recommended the syringe method in the past but don't have a specific adhesive that we use. Just make sure that you inject liberally in each direction and try not to get adhesive on the surface of your pad when removing the syringe.

Let us know how it goes and which adhesive you go with.