• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Please read the Classified Ads Posting Rules before Posting something for Sale!

    Boats MUST LIST A LOCATION (State)IN THE TITLE (Seems people can't read lately)-along with Make/Model/Year

SOLD Sold Cobra Steering/fangs

Kevin1741

Jet Boat Junkie
Messages
133
Reaction score
53
Points
132
Location
Ludlow, Massachusetts
Boat Make
Yamaha
Year
2014
Boat Model
SX
Boat Length
24
Set of cobra steering and fangs with all hardware. Off of my 2014 sx240. Sold the boat. $275 shipped to the lower 48.
 

Attachments

  • image.jpeg
    image.jpeg
    3.6 MB · Views: 21
Lol....
Maybe Jeff might buy them back!
 
No but for anyone who buys them and That is a very low price those are around 450 new, I can provide you with the install info for both the ultimate steering and the fangs so you do not have any problem installing them correctly.
Also F Y I this works on all Yamaha twin engine jet boats except the 21 and 24 foot articulating keel models. They also work on the 19 foot boats even with the keel just find someone to go in on the set who also has a 19 foot boat
 
Last edited:
I'll take 1 set. I have a 15 AR190
 
Well that was fast , just have them email me so I can give them the proper install info, there is one very simple thing that occasionally people just disregard but it is critical to insure the parts work properly , I mention it often in the instructions also. YOU MUST USE THREAD LOCKING COMPOUND ON THE 8MM BOLTS the two on top and the one on the bottom of the nozzle that holds the base on, If you do not do this they have been known to work loose, This is true even if you just install a nozzle on one of these pumps steering or no steering those bolts need thread locking compound to secure them. And do not use the tape or the jell type, use a minimum of 242 or it's equivalent. Obviously the smaller screws have nylock nuts so those are fine.


 
@Kevin1741
I think he is looking to buy half of it!
 
Just a heads up the fang setup won't split to two boats since there are only 2 of them on the twin engine setup but I know where they can buy a new set for the second boat if they wish.
 
I had emailed Kevin couple days ago and agreed to buy it yesterday afternoon.... I will hit you up Jeff if I need anything. I am replacing an older set of magnums on my 2011 Limited S.
 
ok cool let me know if you need any assistance also on the older mags I have the newer base plates for those that are also compatible with the fangs if you get someone wanting to purchase those from you That set is also a very effective and versatile system
 
thanks, I will probably sell mine once I get the ones from Kevin.. Probably will post on here for $100 plus shipping. Only reason I wanted to upgrade was for the ability to flip up and the fangs (although I could of added fangs to mine as well)
 
People with the smaller twin engine boats like the earlier 2 stroke models who install the mags can actually set them up toward the top settings and get only slow speed assistance if that is all they want or place them on a lower setting and adjust for high speed and low speed assistance plus they have the ability to be staggered so people can adjust the height of the fins differently between the inside fins , say set them all the way down and the outside fins can be set higher to tweak the effect even more, the reason being that the hull actually shields the inside fins more that the outside fins. On the smaller boats some people like the loose top end feel and with the mags they can get that with the ability to set the exact amount of influence to suit their needs and the ability to alter that from time to time if their needs change. So don't sell those short they are a real effective set.
 
Yeah, they are definitely great, I feel like $100 would be a great price for someone. I'd rather sell them cheap and send them to a good home than try to get more out of them... not really about the money considering how much Ive spent in the last few months. :)

Someone with a single engine could buy mine for $100, and try to sell the other one and maybe come out with a free pair.....or pay the discount forward and split it and be in a set for $50
 
The Magnums are a 324 dollars set for a twin engine boat I think you are too low, half price is low.
They would be a much better idea than those weird ones that just came out.
 
Last edited:
I'll take good karma over the extra money. :winkingthumbsup"
 
You never heard no good karma goes unpunished?
 
I'll take the cash....lol
 
Money is easy come easy go!!
 
Karma can go either way!
 
Back
Top