• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Starboard/drivers side middle cleat

edsr23

Jet Boat Lover
Messages
14
Reaction score
1
Points
80
Location
Las Vegas, NV
Boat Make
Yamaha
Year
2011
Boat Model
Limited S
Boat Length
24
I was out at the lake last week and noticed that my starboard side mid cleat was loose. I was wondering how to get to it so I can tighten it. I was thinking that I could reach it by removing the throttle/shift controls. Thought I would ask the experts and hopefully save some time and headache :banghead: before I start taking things apart.
 
Bump.. any luck?
 
There is a piece of plywood at the front edge of the Starboard side storage compartment behind the captians chair. It looks like it is just 2 screws, but I know looks can be deceiving. You might be able to reach it from there. If I get to my 12v socket / USB charger install today I'll post up a pic or instructions.
 
Back
Top