• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Start switchs for 05 SX230

Papa

Jet Boat Junkie
Messages
168
Reaction score
81
Points
142
Location
Lake Sinclair GA
Boat Make
Yamaha
Year
2013
Boat Model
242 Limited S E-Series
Boat Length
24
Has anyone found after market start switches for the SX230's. Can't believe Yamahas prices. Thanks, Papa
 
I found some but lost the link. I think the yellow / red wire is not needed. Mine is broken off and hanging there and that's why I looked for switches. I swapped the plug to the other switch and it started just fine with the broken wire. I'm not 100% on this, but I think the lanyard and clean out port switch link into the key switch to allow cranking but no start (lanyard) or no cranking (clean out)
 
Back
Top