• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Stoltz Bow Roller

L

Lth101

Active Member
Messages
71
Reaction score
20
Points
37
Boat Make
Yamaha
Year
2014
Boat Model
AR
Boat Length
23
Doing my best to get my Stoltz bow roller from Jet boat pilot to be centered on my boat. I had to put 3 washers on the right side to space it out a little bit so it wouldn’t crush. I also noticed the piece on my trailer that the winch and bow roller is attached to had a lot of play back and forth so I tightened that as well. Any ideas?
 

Attachments

  • IMG_7853.jpeg
    IMG_7853.jpeg
    339.4 KB · Views: 31
  • IMG_7852.jpeg
    IMG_7852.jpeg
    529.7 KB · Views: 29
  • IMG_7851.jpeg
    IMG_7851.jpeg
    376.7 KB · Views: 29
  • IMG_7850.jpeg
    IMG_7850.jpeg
    489.6 KB · Views: 27
Did you talk to jbp about this ? Will is big on customer satisfaction
 
@Lth101 I prefer the smaller bells on the side of my Stolz so I have more contact with the center roler. Find that if it just on the side bells it flexs a bit on some good bump.

Anyhow, either you need to loosen your winch bracket at the trailer and see if you can wiggle it to center the roller. OR, you need to adjust the boat on the bunks and the bunks themselves to straighten out the boat more.
 
1697684153350.png
 
The other thing I do, is when I am coming out of the water and the bunks are wet, and I have the winch strap on and safety chain attached I will go 5 mph or so and hit the brakes hard. This will snug the boat against the roller and as in your case very well could center it for you. Try that first before you get into it to far.
 
HangOutdoors said:
@Lth101 I prefer the smaller bells on the side of my Stolz so I have more contact with the center roler. Find that if it just on the side bells it flexs a bit on some good bump.

Anyhow, either you need to loosen your winch bracket at the trailer and see if you can wiggle it to center the roller. OR, you need to adjust the boat on the bunks and the bunks themselves to straighten out the boat more.
Click to expand...
HangOutdoors said:
View attachment 210484
Click to expand...
HangOutdoors said:
View attachment 210484
Click to expand...
Maybe i would have been better off :\ i just chose what was supposed to be a perfect fit for the boat i have.
 
FSH 210 Sport said:
Did you talk to jbp about this ? Will is big on customer satisfaction
Click to expand...
I just shot them an email, the left bell on the roller also has an unfinished edge which looks like could really scratch the scrap out of the bow of my boat when loading it. The right bell is nice and rounded... kind of weird. I would put my old one back on but its even worse lol
 
That is the incorrect bell size for that boat. I believe it has come up before that their sizing for each boat should be double checked.
 
You must log in or register to reply here.

Similar threads

Daren and Heather
Stoltz Bow Roller Maintenance??
Replies
6
Views
524
Jerlane
J
D
Can't get stoltz bow roller on
Replies
0
Views
356
DRock3d
D
K
Bow Roller Getting Crushed
Replies
2
Views
439
YoDaddy292
YoDaddy292
PlaneDriver
Bigger Stoltz bow roller help
Replies
6
Views
562
drewkaree
drewkaree
J
Bow guard, bow protector recommendations
    • Like
Replies
0
Views
393
jcb1977
J
Back
Top