Stoltz Roller on 2017-2018 210/212

[Jameson Clark]

Anybody here put the stoltz roller setup on the shorelander trailer for a 210/212? I ordered this one: https://www.boattrailerparts.com/35...maha-Jet-Boat-Shorelandr-Trailers_p_1442.html and put it on last weekend after launching the boat and it just doesn't seem to fit right with the boat loaded. It completely deforms the bells and looks like it is trying to tear them off. Just a very very poor fit in my opinion and curious if anyone else has had any luck with them on this hull. To me, it's like the hull is too flat and not enough of a V for what the roller is designed for. I will get pictures this weekend but wanted to see if anybody else had any experience like this or not. Thanks!

 

[GoVols01]

I replaced my bow roller as well and agree that the bow of the boat doesn't really conform to the shape of the roller too well. I don't fault Stoltz for that though. It has made a good difference for my boat since my bow is no longer getting scuffed up by the factory roller.

 

[Slack]

I agree that it is not an ideal fit with the bow but it beats the factory roller. I was thinking of trying different bells but I didn't find anything that would fit any better.

 

[Jameson Clark]

I pulled the metal "end caps" from the stock roller and put them in the stoltz. They don't fit quite right but is made it some better. Without them, it had the bells so distorted, I am worried they will fail at some point.

 

[Bananas]

Much softer, Stock one made marks on my boat...