• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Sub ques.

Street glide

Jet Boat Addict
Messages
123
Reaction score
73
Points
97
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
21
I have a 07 sx210 and thinkn about maybe adding a sub was curious what y'all thought would be the best place to put it and would you go free air or enclosure

Thanks for the help
 
Same hull here. I have one JL M10w3 in a small sealed enclosure mounted in the port side closet. I also have a JL M10IB running free air cut into the seat just aft of the captains chair facing the bow of the boat. These were both added by the p/o and it is plenty of bass - one or the other on its own would probably be enough for most people.
 
Back
Top