Table for 19ft

[I_squared_r]

Yamaha Boat Table Kit

This Table Kit provides a durable and sturdy surface for meals, games, etc. while on the water. Two stainless steel cup holders High-impact, easy-to-clean polymer construction Stainless steel table stanchion Stainless steel mounting brackets Compatible with 2013-Current Yamaha 21 FT and 24 FT Boats

jetboatpilot.com

Anyone installed this table on their SX AR 190/192/195? Any surprises? Photos? Thanks

 

[FLBulldogger]

Found you a quick link HERE. Good luck!

 

[I_squared_r]

Found you a quick link HERE. Good luck!

Thanks. I've seen that before and for some reason I couldn't find it. Idk why jetboatpilot stopped selling that table kit? Or why they bothered using those components instead of the yamaha table kit?

 

[cdjeeps25]

In addition to the table, the in water seats under the swim platform would be a nice touch for the 190s.

 

[FLBulldogger]

Thanks. I've seen that before and for some reason I couldn't find it. Idk why jetboatpilot stopped selling that table kit? Or why they bothered using those components instead of the yamaha table kit?

I would suspect the demand was low and the price was too high. I have seen other's that find the bracket and then customize a table and grill to swap out.

 

[I_squared_r]

I would suspect the demand was low and the price was too high. I have seen other's that find the bracket and then customize a table and grill to swap out.

I ordered the table so i'll post pictures when it's installed. Garelick makes the stuff and the cheapest option is $260 with garelick bracket, garelick aluminum stanchion, and cheap table top. For anyone interested the part numbers are below

garelick 75343-10
garelick 75648
cheap ebay boat/rv table

But I thinkit needs a shim fabricated so the table will be level. I found the yamaha table kit for $360 shipping+taxes included. It includes the better table, stainless steel stanchion, and shim piece.

 

[FLBulldogger]

[QUOTE="I_squared_r, post: 435726, member: 13982"
But I thinkit needs a shim fabricated so the table will be level. I found the yamaha table kit for $360 shipping+taxes included. It includes the better table, stainless steel stanchion, and shim piece.
[/QUOTE]
Also I think it was @haknslash on another thread that mentioned the importance of putting some reinforcement on the back of the panel where u place it to help with the stress and try to prevent cracking.

 

[I_squared_r]

Yeah i'll order a 8"x8" 1/8"thk aluminum sheet to put behind it. Also I don't think the kit includes hardware.
Between the table project, bow windbreaker, and jet ski .. I have a big mcmaster order coming

 

[FLBulldogger]

Yeah i'll order a 8"x8" 1/8"thk aluminum sheet to put behind it. Also I don't think the kit includes hardware.
Between the table project, bow windbreaker, and jet ski .. I have a big mcmaster order coming

Can't wait to see the pics!

 

[I_squared_r]

Partzilla updated the order "Available Tuesday, May 26th, 2020"
Am I really going to wait over a month for this table? I was hoping that I could start quarantine projects now. Well, I guess that I should be grateful that I am still working and can afford these things