-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
throttle adjustment
- Thread starter louckswj
- Start date
skrip345
Jetboaters Commander
- Messages
- 255
- Reaction score
- 330
- Points
- 182
- Location
- Sedalia, MO
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- Limited S
- Boat Length
- 24
Might check this out. My slumps a bit too, but I haven't messed with adjusting it just yet.
https://jetboaters.net/threads/throttle-dropping-check-here.299/
https://jetboaters.net/threads/throttle-dropping-check-here.299/
Evildwarf
Jetboaters Lieutenant
- Messages
- 377
- Reaction score
- 458
- Points
- 157
- Location
- Woodstock GA
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- Limited
- Boat Length
- 24
Throttle drop is an issue with our boats.
Some folks put up with it, others attempt to fix it.
There are several threads about a fix.
Some folks put up with it, others attempt to fix it.
There are several threads about a fix.
David D
Jetboaters Lieutenant
- Messages
- 250
- Reaction score
- 127
- Points
- 152
- Location
- Westerville, Ohio
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- SX192
- Boat Length
- 19
I've got the same issue - throttle "pops" back to near neutral at slow speeds. I'll check out the advice above. Is there any reason that the process would be different for us single engine guys?
CrankyGypsy
Jetboaters Captain
- Messages
- 352
- Reaction score
- 297
- Points
- 202
- Location
- Tampa, FL 33615
- Boat Make
- SeaDoo
- Year
- 2008
- Boat Model
- Challenger
- Boat Length
- 18
"throttle drop" and being loose are two different things.
- if you're throttle(s) drop a couple hundred RPM's without you touching them, that is throttle drop. check the link above for that fix.
- if your throttle lever is really loose, you may ALSO need to increase tension on the throttle mechanism. on a 2005 AR230HO (for example), you have to remove the black cover on the throttle assembly and tighten the screws ("C" in the following diagram) a little bit:
- if you're throttle(s) drop a couple hundred RPM's without you touching them, that is throttle drop. check the link above for that fix.
- if your throttle lever is really loose, you may ALSO need to increase tension on the throttle mechanism. on a 2005 AR230HO (for example), you have to remove the black cover on the throttle assembly and tighten the screws ("C" in the following diagram) a little bit:
David D
Jetboaters Lieutenant
- Messages
- 250
- Reaction score
- 127
- Points
- 152
- Location
- Westerville, Ohio
- Boat Make
- Yamaha
- Year
- 2014
- Boat Model
- SX192
- Boat Length
- 19
@CrankyGypsy I have the second issue where the lever pops back. I do notice some change in RPM but the Cruise Assist manages that.
I'll try to adjust the tension per your diagram. Thanks!
I'll try to adjust the tension per your diagram. Thanks!
Christian Rodriguez
Jet Boat Addict
- Messages
- 26
- Reaction score
- 27
- Points
- 92
- Location
- Hialeah, FL
- Boat Make
- Yamaha
- Year
- 2015
- Boat Model
- AR192
- Boat Length
- 19
This happens to me as well, only when I have no wake mode on the third click at about 21-2200 rpms, if it's at 2k on the second click it won't happen. If I set the throttle around there without the switch it also doesn't happen.
Smarshek
Member
- Messages
- 5
- Reaction score
- 1
- Points
- 10
- Boat Make
- Yamaha
- Year
- 2003
- Boat Model
- AR
- Boat Length
- 21
I have a 2003 - AR 210 and the throttles have to be held in place full time. If you let go they drop to idle. Is there a way to correct this? I kind of like to use two hands to steer sometimes and it’s impossible with these throttles reducing to idle all the time. Thanks
Similar threads
