Throttle/Gate Adjustment

[jpg1130]

Port throttle is a little tight. How do I remove the controller for adjustment? Do I even need to remove the controller? Where are the screws?

Thanks in advance!

 

[Julian]

So the throttle (Binnacle) is hard to move only during the throttle section(beyond the first click), or is it hard to move during the gate movement section(neutral to first click)?

 

[jpg1130]

Thanks for the quick response. It's tight beyond the first click. Just not sure how to remove the binnacle for inspection/lubing.

 

[MNdrifter]

There is an access cover on the aft side of the binnacle. Pop it off. There is a friction adjustment screw for each lever. If this doesn't fix it you may need to lube the cable or check for binding.