- Messages
- 1,071
- Reaction score
- 1,497
- Points
- 197
- Location
- Prescott Valley, AZ
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SX
- Boat Length
- 23
Brand new in box Timbren Suspension Enhancement System (See fitment below) and Slide on Towing Mirrors (For Tundra & Sequoia) which are also brand new in box. I traded my Tundra in about 1 1/2 years ago and never installed either of these.
I paid approximately $ 250.00 for everything, selling for $ 175.00 and I will include shipping within the Continental United States.
http://timbren.com/products-page/ses/tortun4/
TORTUN4 - Rear Axle SES Suspension Upgrade
This SES Suspension Upgrade fits the rear suspension of a Toyota Tundra, Tacoma & Nissan Titan truck(see below for full list of applications). Each laser cut piece of steel is welded and powder-coated to ensure a quality fit. We’ve engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you’re pulling a trailer or carrying a heavy load in the bed of your vehicle, our hollow rubber springs adjust automatically to keep the vehicle level at all times.
This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality – loaded or unloaded. (There should be a ½” to 1 ½” gap between rubber spring and frame to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.
Fitment Checklist
Nissan Titan
2004-2015
2WD Only
Toyota Tacoma
2005-2016
4WD Only, Equipped With 4 Leaf Rear Spring Suspension
Toyota Tacoma Pre-Runner
2005-2016
2WD Only
Toyota Tundra
2000-2015
2/4WD
I paid approximately $ 250.00 for everything, selling for $ 175.00 and I will include shipping within the Continental United States.
http://timbren.com/products-page/ses/tortun4/
TORTUN4 - Rear Axle SES Suspension Upgrade
This SES Suspension Upgrade fits the rear suspension of a Toyota Tundra, Tacoma & Nissan Titan truck(see below for full list of applications). Each laser cut piece of steel is welded and powder-coated to ensure a quality fit. We’ve engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you’re pulling a trailer or carrying a heavy load in the bed of your vehicle, our hollow rubber springs adjust automatically to keep the vehicle level at all times.
This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality – loaded or unloaded. (There should be a ½” to 1 ½” gap between rubber spring and frame to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds.
Fitment Checklist
Nissan Titan
2004-2015
2WD Only
Toyota Tacoma
2005-2016
4WD Only, Equipped With 4 Leaf Rear Spring Suspension
Toyota Tacoma Pre-Runner
2005-2016
2WD Only
Toyota Tundra
2000-2015
2/4WD