sailorkane
Active Member
- Messages
- 34
- Reaction score
- 8
- Points
- 37
- Boat Make
- Yamaha
- Year
- 2000
- Boat Model
- LS
- Boat Length
- 20
Trying to build some trailer guild posts myself. Question is a simple one. LS2000 flares from the back to front. Beam from outside rub rail is 92" near the mirrors (max) and narrows by approximately 4" to 88" back where the trailer guides will be installed. That is 2" per side. So how far out from the hull at the back do you install them? If they are installed at 92" apart, they will just barely touch when the boat goes on the trailer and have a 2" gap on each side when fully loaded. Is that the right way? Or do you all prefer the posts to be slightly wider than the boat max beam? Or slightly narrower, thereby requiring the poles to bend slightly to accomodate the boat? Been many years since I did the trailer boat scene. I've read a lot of posts and people don't seem real clear.