• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Trailer jacking

KXCam22

Jetboaters Admiral
Messages
1,084
Reaction score
908
Points
272
Location
Kamloops BC
Boat Make
Yamaha
Year
2008
Boat Model
AR
Boat Length
23
Just learned not to jack up one side of the trailer unless you are hooked up to the truck. If you are supported by the trailer jack it can't handle the side load and it bends. I just bent the shiny new electric jack on my TT, but the same principle applies to our boat trailers. The jack lived but it does a little hula on the way up or down. Cam
 
I read that about the travel trailers needing to be hitched and definitely decided to do so when lifting both axles on one side to adjust brakes on my travel trailer. I like the tow vehicle keeping it in place versus just chocks. I use a 3 ton jack stand (only for the size, not the load) on the frame at the front of my boat trailer when storing and relieve the load from the jack wheel. I have jacked the boat/trailer without being hitched but only with the jack stand, not the wheel jack.
 
Back
Top