Trolling Motor Power Receptacle

[John_D]

Want to put a trolling motor on my new 195 FSH when I get it but I don't see receptacle for it. I do see the the trolling motor plate??? Has anyone installed one and if so any suggestions would be appreciated Thanks

 

[Elliott]

Mine is installed on the vertical surface above the raised deck next to the trolling motor mount.

 

[John_D]

Mine is installed on the vertical surface above the raised deck next to the trolling motor mount.

did you install?

 

[Elliott]

No - I had a pro do the all of the electronics (see signature). The part he used for the plug was:
Battery Tender
027-0004-BK Trolling Motor Plug/Socket

 

[John_D]

24 or 32 volt?

 

[Elliott]

24V

X2 Power Battery
SLI31AGMDPM 12v Group 31 AGM Dual

 

[LawRenceAr190]

Pictures pls and thank you!!

 

[John_D]

Good morning,
I installed a Minn Kota Riptide Terrova with a 60" shaft. I'm powering it with 24v (2 Optima Bluetop D34M Batteries). I used a Minn Kota MKR-26 Trolling Motor Plug Receptacle 1865129 MKR-26 Trolling Motor Plug and Receptacle. I installed a NOCO Genius onboard charging system. I wired my system using 6 gauge marine cable. Note: if you're going with a 24v system it is recommended you use a 40 amp breaker. If you have any questions please feel free to contact me. See attached photos. Help this helps.