I_squared_r
Jetboaters Admiral
- Messages
- 1,281
- Reaction score
- 2,368
- Points
- 272
- Location
- Medellín, Colombia
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- 242 Limited S E-Series
- Boat Length
- 24
My anchor light broke so I made this light mount with my 3D printer. A few things.. 1. In the photo, it's not sitting all the way down because the light screws I have are too long and 2. I bought a cheap drill bit from amazon and it broke 1" down when drilling the tower .. So I am running a wire to the outside without a quick connector so I can still put a rope around the tower. Learn from my mistake BUY A GOOD DRILL BIT. Anyways, it still works well, installs easy, and installs with a set screw. If people are interested then I can print a few.
I should've kept the pole for the old anchor light because I just realized that I could've cut it down and use it as a flag pole holder. I'm going to measure the diameter and see if I can find a stainless pole that fits tight in the base.
I should've kept the pole for the old anchor light because I just realized that I could've cut it down and use it as a flag pole holder. I'm going to measure the diameter and see if I can find a stainless pole that fits tight in the base.
