• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Wear ring/impeller bomb proof set up?

N

Nate907

Member
Messages
2
Reaction score
0
Points
10
Boat Make
Other
Year
2019
Boat Model
Other
Boat Length
Other
I live in southeast alaska and have a jet stream that i get pretty gnarly with in 1-3 inches of water and debris of every kind. What would be a dead nutts solid option for a wear ring and impeller so im not blowing either of those out so often? Heard maybe a UHMW wear ring and stainless impeller or aluminum wear ring and stainless impeller. Any info will help thanks!
 
Nate907 said:
I live in southeast alaska and have a jet stream that i get pretty gnarly with in 1-3 inches of water and debris of every kind. What would be a dead nutts solid option for a wear ring and impeller so im not blowing either of those out so often? Heard maybe a UHMW wear ring and stainless impeller or aluminum wear ring and stainless impeller. Any info will help thanks!
Click to expand...
Nate

There probably will not be a lot of people here that could help you with that. Most of the members here have leisure lake boats. You have a river boat from the sounds of it. Have you checked out River Jet Boating Forum • Index page (meanchicken.net) ?
 
I don't think a Yamaha would be a good tool to use in that environment. Have you seen others with Yamaha's?
 
The nylon wear rings will minimize damage to the impeller and are inexpensive to change once you get the housing.
 
@Cobra Jet Steering LLC
I have the precision marine wear ring on my boat. 2010 AR240
Do you know where to purchase replacement wear rings from?
 
If you are referring to the nylon rings I would say you need to go to whom ever produced the housing if you swap out the ring and it is not an exact match you will probably have issues so check with the company that made the housing. I buy my housings from a local company and I usually get a couple extra rings so if I do need to replace them I don't have to wait for one. I
 
You must log in or register to reply here.

Similar threads

Faith Johnson
Yamaha Wear Ring
Replies
2
Views
408
Faith Johnson
Faith Johnson
F
How bad is silt/mud/sediment on wear ring and impeller?
Replies
5
Views
683
buckbuck
buckbuck
M
Better impeller for 2017 195 ho impulse 250hp
Replies
1
Views
697
Monsterbuck1974
M
S
Replace wear ring and Impeller?
Replies
7
Views
2K
Joatmon
Joatmon
dwall2181
HELP? Cavitation after changing wear ring and impeller.
Replies
3
Views
874
FSH 210 Sport
FSH 210 Sport
Back
Top