• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Wet sounds led connections

toddgray519

Well-Known Member
Messages
50
Reaction score
4
Points
57
Boat Make
Yamaha
Year
2020
Boat Model
AR
Boat Length
21
I have a wet sounds set up want to know what do I need to connect my rgb wire to each speaker (I see a lot of stuff on Amazon but not rgb to rgb)

also I have a 222x are the 2 tower speakers pre wired for LEDs like the rest?
 
I have a wet sounds set up want to know what do I need to connect my rgb wire to each speaker (I see a lot of stuff on Amazon but not rgb to rgb)

also I have a 222x are the 2 tower speakers pre wired for LEDs like the rest?
I’m going to pull one of my speakers sometime this week and see if I can figure out if mine are rgb compatible and what I need. I’ll let you know what I find out.
 
Ok thanks I appreciate it
 
I have a wet sounds set up want to know what do I need to connect my rgb wire to each speaker (I see a lot of stuff on Amazon but not rgb to rgb)

also I have a 222x are the 2 tower speakers pre wired for LEDs like the rest?
4 pin connectors. WetSounds has them or you can find similar on Amazon
 
Back
Top