Justin Turner
Well-Known Member
- Messages
- 44
- Reaction score
- 17
- Points
- 52
- Location
- Fort Worth, TX, 76123
- Boat Make
- Glastron
- Year
- 2015
- Boat Model
- GTS
- Boat Length
- 21
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
What are these?
- Thread starter Justin Turner
- Start date
Midnight2V
Jet Boat Junkie
- Messages
- 140
- Reaction score
- 88
- Points
- 137
- Location
- Houston Area
- Boat Make
- Yamaha
- Year
- 2022
- Boat Model
- AR
- Boat Length
- 25
Maybe they wet storage locker drains, cooling water discharge, deck drains, or bilge overboard flow lines? What are they connected to on the inside?
F.M.
Jetboaters Admiral
- Messages
- 1,453
- Reaction score
- 2,329
- Points
- 287
- Location
- Decatur, AL
- Boat Make
- Yamaha
- Year
- 2024
- Boat Model
- 255XD
- Boat Length
- 25
Looks like bilge pump fittings. Do you have 2 bilge pumps? If possible find the fittings inside the hull and follow the hoses to where they come from.
*Edit* Or what he said, since he types faster than me.
*Edit* Or what he said, since he types faster than me.
Justin Turner
Well-Known Member
- Messages
- 44
- Reaction score
- 17
- Points
- 52
- Location
- Fort Worth, TX, 76123
- Boat Make
- Glastron
- Year
- 2015
- Boat Model
- GTS
- Boat Length
- 21
I’m not near the boat and have been meaning to look at it closer once I got a chance. Just figured I would throw the question out there while I’m thinking about it.
I know it’s not the bilge, that’s on the side. I don’t have any wet storage that high.
I was thinking it may be some sort of vent for the exhaust gases or something.
It’s really high up on the transom but does dip in the water occasionally when there is weight on the swim deck. Just wasn’t sure if it could be under water for hours once I add the ballast.
I just need to take a closer look when I get to the boat.
I know it’s not the bilge, that’s on the side. I don’t have any wet storage that high.
I was thinking it may be some sort of vent for the exhaust gases or something.
It’s really high up on the transom but does dip in the water occasionally when there is weight on the swim deck. Just wasn’t sure if it could be under water for hours once I add the ballast.
I just need to take a closer look when I get to the boat.
Similar threads
