Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
I've just used plain wheel bearing grease. If you are worried about mixing two types, I'd clean and repack the bearings. If you want to clean the bearings, use gas, WD40 or any solvent. Make sure you dry the bearings and then re grease. There is probably a YouTube video on how to do it.
I bought some marine grease (CRC). Looks to be the same grease (sea foam green in color). Gave a couple pumps into each bearing buddy to get ready for the trip. Is there a measurement of how far the spring is compressed when the right amount of grease is pumped in?