• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Winterizing 212X ballast system

husbus

Member
Messages
18
Reaction score
11
Points
22
Location
TN
Boat Make
Yamaha
Year
2020
Boat Model
212X
Boat Length
21
I have a new-to-me 2020 212X and trying to make sure I have all my ducks in a row for winterization.

The center bag I'm thinking I'll just disconnect, empty, and store in my garage. For the stern tanks, I'll disconnect the hoses and leave them off for the winter. That should let them drain enough to be safe.

What about the hosing and pumps? Will the electrics let me run the pumps dry in fill and drain modes to evacuate the system sufficiently? Or would it be a good idea to blow compressed air through the hoses toward the pumps? Or not worth worrying about?

Thanks!
 
I drain all 3 tanks using the pumps, open the drain cap in the center bag and make sure the water is drained manually. Then I pour about 1/2 gallon of pipeline antifreeze in each tank and then run the pumps again to drain the tanks. This way I'm confident that I've run antifreeze through the whole system.

Not sure I need to do all this but I've been doing it for 7 years and have never had a problem.
 
Back
Top