Yamaha wakeboard rack spring loaded handle replacement

[Damsroy]

I lost my handle in the water. Need a replacement.
it is a 2016 OEM Deluxe swivel wakeboard rack. I believe Part # SBT-RMRS-BK-14 for the rack.
Can't find part # for the spring loaded handle only
Thank you in advance

 

[Damsroy]

Nobody here had to find a replacement for this handle?

 

[OperationROL]

I check Grainger for these type of things. Here one I found from a quick search.

https://www.grainger.com/mobile/product/3DEY5?gclid=Cj0KCQjwvvj5BRDkARIsAGD9vlK1VXsbF4MJ9AwPFXzPAld6uvdRlaw_nlwj6XfgmRCgJp-JUBUzfp4aAj9wEALw_wcB&cm_mmc=PPC:+Google+PLA&ef_id=Cj0KCQjwvvj5BRDkARIsAGD9vlK1VXsbF4MJ9AwPFXzPAld6uvdRlaw_nlwj6XfgmRCgJp-JUBUzfp4aAj9wEALw_wcB:G:s&s_kwcid=AL!2966!3!450728439737!!!g!929032029771!&gucid=N:N:PS:Paid:GGL:CSM-2295:NWO3JH:20500731

 

[jmargo]

I asked the same question. https://jetboaters.net/threads/yamaha-swivel-rack-handle.29380/

How did you lose it ? The roll pin should have kept it in.

 

[Damsroy]

@OperationROL Thank you!! The handle is actually internally threaded and not external thread but a quick search on Grainger harvested good results.
I will check the size of the thread today to order the right part and report after i receive and test fit the part.

https://www.grainger.com/search?searchBar=true&searchQuery=Adjustable+Handle%2C+internal+Threads

 

[Damsroy]

@jmargo as usual it was a combination of events...was getting ready to raft with friends in a cove and they wanted me to tied on the portside where the rack was. So i had to rotate it very quickly while the boat was moving and approaching the other boat. Was unscrewing the handle to fast and next thing i know the handle is in the water....

 

[jmargo]

@jmargo as usual it was a combination of events...was getting ready to raft with friends in a cove and they wanted me to tied on the portside where the rack was. So i had to rotate it very quickly while the boat was moving and approaching the other boat. Was unscrewing the handle to fast and next thing i know the handle is in the water....

So you just had the threads sticking up ? I tried to separate my handle from the threaded rod but didn't have luck.

 

[Damsroy]

So now I understand.....The thread is supposed to be part of the handle? When you remove the handle the thread is supposed to come with it and not stay on the rack?

 

[jmargo]

Yes, The area where the threads are missing has a roll pin going across it. Its the small hole on the bottom left of your circle. It could possibly just be thread locked on.

 

[USN_Snipe4Life]

@OperationROL Thank you!! The handle is actually internally threaded and not external thread but a quick search on Grainger harvested good results.
I will check the size of the thread today to order the right part and report after i receive and test fit the part.

https://www.grainger.com/search?searchBar=true&searchQuery=Adjustable+Handle%2C+internal+Threads

Kinda old thread but did you ever find out if this one from Grainger works? Thanks.

 

[WestMIJet]

Did anyone ever find a good replacement for this handle. Mine broke and I need to replace it.