• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Yds info

Benoit

Jet Boat Lover
Messages
41
Reaction score
32
Points
82
Location
Attica NY
Boat Make
Yamaha
Year
2009
Boat Model
Limited S
Boat Length
23
Does anyone have the proper fuel injection interval numbers? Length of firing in milliseconds
 
Last edited:
I’m having a running rich issue with starboard motor. Yds shows twice as long injector opening as port.
 
On all 4 cylinders. Tops of pistons are black like the plugs. Which are new this year. Port side pistons are grayish with clean plugs
 
I swapped ecus last night. Will hook up yds to see if the injector [HASH=536]#’s[/HASH] went with them tonight
 
Swapped ecus and fuel pumps. No change on injector duration. 6ms on starboard. 3-3.5ms on port. Not sure how ecu decides this timing but must read something like a vehicle uses a maf sensor
 
I have a 2008 and had a Throttle Position Sensor go bad. It had an effect on the timing at idle. You may want to consider that.
 
Did you save the output? Can you post it?
 
I can’t post output. Just a couple bad pics30A10108-D14C-4C58-9343-459B5BF3EEBB.jpeg9D4B3867-5FEB-43CF-A52A-A932B6EB11FE.jpeg
 
Back
Top