Bonehead Move - Trailer Brake

anmut · 2025-06-30T09:08:46-0400

Welp, this weekend I finally forgot to disconnect the trailer brake safety cable... I've been so careful over these last five years to turn my backup cam on and double check, but I was in a rush on Saturday to disconnect.

I did catch it pulling out and was able to reverse the truck asap, so it doesn't appear that I actually activated the brake. The cable came out a little bit, maybe an inch or so. The "tab" underneath the coupler where, according to the manufacturer, is the tell for the brake being stuck on, moves freely.

Posting this here to get some feedback on if I should be OK. I haven't had a chance to hook back up and try it.

CarolinaJet · 2025-06-30T09:20:23-0400

anmut said:
Welp, this weekend I finally forgot to disconnect the trailer brake safety cable... I've been so careful over these last five years to turn my backup cam on and double check, but I was in a rush on Saturday to disconnect.

I did catch it pulling out and was able to reverse the truck asap, so it doesn't appear that I actually activated the brake. The cable came out a little bit, maybe an inch or so. The "tab" underneath the coupler where, according to the manufacturer, is the tell for the brake being stuck on, moves freely.

Posting this here to get some feedback on if I should be OK. I haven't had a chance to hook back up and try it.

View attachment 236467

I did the exact same thing a few years ago when I was in a rush, mine looks like yours except pulled a little further out sometimes. I did the screwdriver thing underneath before hooking up again. Part of the yellow on mine comes out sometimes but everything with the braking still works normally so I haven’t done anything about it.

Madman · 2025-06-30T12:54:43-0400

As long as the you can depress the tab to release the brakes or it moves in and out freely, you should be good to go. You can order the little clip that holds the cable in.

anmut · 2025-06-30T13:29:47-0400

Madman said:
As long as the you can depress the tab to release the brakes or it moves in and out freely, you should be good to go. You can order the little clip that holds the cable in.

Thanks, that's exactly what I was thinking.

AZMark · 2025-06-30T17:29:10-0400

UFP Breakaway Cable Clip #34355

Stock# 5415086UFP Replacement Breakaway Cable Clip keeps the breakaway cable from being accidentally pulled. Fits A-60, A-75 and A-84 brake actuators.

www.easternmarine.com

You could probably make one of these with a regular washer too

Bonehead Move - Trailer Brake

anmut

Jetboaters Admiral

CarolinaJet

Jet Boat Addict

Madman

Well-Known Member

anmut

Jetboaters Admiral

AZMark

Jetboaters Admiral

UFP Breakaway Cable Clip #34355

Similar threads