Patae
Jet Boat Lover
- Messages
- 80
- Reaction score
- 111
- Points
- 72
- Location
- Tallahassee ,fl
- Boat Make
- Yamaha
- Year
- 2018
- Boat Model
- FSH Sport
- Boat Length
- 19
Bought a 12"square block of 1" thick sea board
Also bought a pack of stainless bolts , cheaper than home Depot or Lowe's.
Cut seaboard into 4 pieces , seat brackets are about 14 1/2" long. Put the joint in the middle . Made a pattern from construction paper for each side and punched hole holes directly through seat brackets so they would line up . Slide them in use washers from previous bolts and tighten them.down. you may need to move the cooler brackets back about an 1/2" to get cooler to sit down in indentation I just haven't done that and doubt that I will.
Also bought a pack of stainless bolts , cheaper than home Depot or Lowe's.
Cut seaboard into 4 pieces , seat brackets are about 14 1/2" long. Put the joint in the middle . Made a pattern from construction paper for each side and punched hole holes directly through seat brackets so they would line up . Slide them in use washers from previous bolts and tighten them.down. you may need to move the cooler brackets back about an 1/2" to get cooler to sit down in indentation I just haven't done that and doubt that I will.