kaylix
Well-Known Member
- Messages
- 64
- Reaction score
- 23
- Points
- 57
- Location
- NY, NC, GA
- Boat Make
- Sugar Sand
- Year
- 1997
- Boat Model
- Tango Xtreme
- Boat Length
- 17
How do I determine the correct size to order for my trailer?
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Bearing Buddy
- Thread starter kaylix
- Start date
Babin Farms
Jetboaters Fleet Admiral
- Messages
- 3,868
- Reaction score
- 12,774
- Points
- 507
- Location
- Lower Alabama
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
Take the cap off of the hub and measure it to get the right size.
Chuck Buck
Jet Boat Addict
- Messages
- 89
- Reaction score
- 98
- Points
- 97
- Location
- Lake St Clair
- Boat Make
- Sugar Sand
- Year
- 2004
- Boat Model
- Mirage
- Boat Length
- 18
Where’s the adventure in THAT?!?
Better yet, take picture of trailer from 50 feet away using potato cam. Drive 30 minutes to trailer shop in rush hour traffic and multiple road construction zones. Show picture to pimple-faced teen age summer intern at parts counter and ask what size fits. After blank stare turns into deer-in-headlights look, kid yells for Smitty, the shop owner. Smitty drags self from under trailer used for leaking skid steer loader, comes to the counter with Dirty Harry attitude and snarls “whaddaya want?” You proceed to show Smitty your picture, and he in turn points to a rack with 50 different sizes in 1 millimeter increments and says “over there.” Smitty then turns and walks back to his hydraulic oil soaked project. You look at the kid, he stares back at you, you go to the rack, and after 20 minutes of agonizing over what you THINK is the right size, pick out a set, pay for it, drive home, open the sealed package (thereby eliminating any chance of a refund), hold up the part to your hub, and find out it’s not even close.
“measure it” he says – pffffft!
Similar threads
