• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Bow handles mod for 2015 boats

Thanks Bennie. The amazon handles are nice, I ended ordering a set of 8" SS handles with studs off of eBay. $36 for the pair including shipping. Thanks for the idea!
 
@Thor - May I highly suggest watching your wiring, laying the handles out and using a pencil to mark their location, and then using pilot holes.

Just my experience bud.
 
@Thor - May I highly suggest watching your wiring, laying the handles out and using a pencil to mark their location, and then using pilot holes.

Just my experience bud.

Will do for sure. My grandfather taught me to measure once and cut twice....
 
Nice mod @rsg1963 - Did you happen to put some rather wide washers on the inside to assist with the tension spreading as well?

You're going to love those handles. I never realized just how handy they would be until we installed them. ENJOY!! :winkingthumbsup"
 
Thanks Bennie, I did add larger washers underneath as well, just to be safe....er.
You can grab these and move the boat quite a bit on the trailer and they don't move at all.
 
Back
Top