• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Busy Couple of Weeks - Eight Projects Completed

Looks great!!!

Tach problem was your YDS cable plugged in.....??
 
For comparison purposes:

Murky water picture from earlier in the year after installation:
diablo-vega-drain-plug-light-jpg.36105




Recent picture in clear water:
View attachment 40047
The light looks great! To do this project, you buy the light, run the wire to 12 volt power supply, add a switch, and that is it?

Also, to put the plug in and take it off after your outings, what do you do? Does it just hang down by the power supply wire?
 
The light looks great! To do this project, you buy the light, run the wire to 12 volt power supply, add a switch, and that is it?

Also, to put the plug in and take it off after your outings, what do you do? Does it just hang down by the power supply wire?

Hey @farrelltravis sorry for the late response I was off line all weekend. The light comes with 10 or 15 feet of wire attached to it. Fish the wire through the drain and the cleanout tray compartment over to the battery area. I had a fused bus bar there that I used in conjunction with the switch I purchased and that is it. The original Diablo light came with a waterproof screw connection that allowed you to remove the light. The Vega does not and I asked the company about that. They pointed me to a different type of connector but I haven't yet added such. I will unscrew the plug to drain any water and then put it back in - the light is fairly large and heavy (compared to a drain plug) and I don't want it hanging there and swinging around while driving. I will let it hang while parked in the driveway - but ultimately it would be best to add some type of disconnect.
 
Hey @farrelltravis sorry for the late response I was off line all weekend. The light comes with 10 or 15 feet of wire attached to it. Fish the wire through the drain and the cleanout tray compartment over to the battery area. I had a fused bus bar there that I used in conjunction with the switch I purchased and that is it. The original Diablo light came with a waterproof screw connection that allowed you to remove the light. The Vega does not and I asked the company about that. They pointed me to a different type of connector but I haven't yet added such. I will unscrew the plug to drain any water and then put it back in - the light is fairly large and heavy (compared to a drain plug) and I don't want it hanging there and swinging around while driving. I will let it hang while parked in the driveway - but ultimately it would be best to add some type of disconnect.
Thanks for the description. So, this particular light fits the stock drain plug receptacle it sounds.
 
Back
Top