Cracked the pilot outlet of my '11 AR240 - Need help replacing

[prorider17]

Didn't really think I could do it, but I did... I was washing my boat yesterday after a great day on the water, and when I had my wash brush go over the starboard engine pilot outlet (pee hole), I cracked the top part (bend). I know it won't affect anything, as it just makes the stream shoot down instead of straight out, but I'd like to repair it. It looks like part # F1K-6753B-00-00 and is held in by a nut on the outside and possibly a band clamp on the inside? Is this band clamp accessible from the inside or outside?

 

[Andy S]

Didn't really think I could do it, but I did... I was washing my boat yesterday after a great day on the water, and when I had my wash brush go over the starboard engine pilot outlet (pee hole), I cracked the top part (bend). I know it won't affect anything, as it just makes the stream shoot down instead of straight out, but I'd like to repair it. It looks like part # F1K-6753B-00-00 and is held in by a nut on the outside and possibly a band clamp on the inside? Is this band clamp accessible from the inside or outside?

The band clamp is inside the boat and can be replaced with a stainless steel hose clamp.

 

[prorider17]

Thanks @andy07sx230ho. Do I need to go through the area where I put my cooler (storage area under the seat behind the captain chair)?

 

[Andy S]

Thanks @andy07sx230ho. Do I need to go through the area where I put my cooler (storage area under the seat behind the captain chair)?

Correct, you will see the two tube coming from the engine compartment going to the hull.