• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Creaky pedestal seats

MrMoose

MrMoose

Jetboaters Admiral
Messages
1,579
Reaction score
2,278
Points
287
Location
Calgary, AB, Canada
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
24
My pedestal seats have always made creaking/cracking/snapping noises when I shift my weight in them, or when I hit waves. It's not a squeaking noise. The dealer determined that the indexing rack and lever in the slide mechanism were making the noise. They first tried greasing it but it did not help, so they replaced the sliders under warranty. The new ones are just as noisy as the old ones.
Has anyone figured out a way to fix this?
Thanks
Here's a short video clip
 
Yup, that's annoying alright. After about the 89 creak I had to get a beer. I couldn't see the whole mechanism but I wonder If there is a place for nylon spacers or washers or is there just too much space where the seat rides in the rails?
 
Gym said:
Yup, that's annoying alright. After about the 89 creak I had to get a beer. I couldn't see the whole mechanism but I wonder If there is a place for nylon spacers or washers or is there just too much space where the seat rides in the rails?
Click to expand...
Some day, I'll take one apart and look at it to see if there's a quick fix. I was hoping that someone on the forum had solved this problem. I assume that it is common since the replacement sliders have the same problem as the original ones. Or... maybe nobody other than me noticed the noise, and now that I've pointed it out, everybody will notice it and it will drive them crazy.
 
I took a closer look at things yesterday. With my head underneath the seat, it sounded like the creaking noise was coming from the pedestal flange. The mounting screws were tight, but I torqued them an extra 20-30 degrees to see if it made a difference; no change. I removed the seat to make sure that the noise is coming from the pedestal...
Here's a video (I wonder if there are some cracked welds where the pedestal tube mates to the flange; I hope that it's not delamination in my floor.)


I asked my dealer to submit a claim to Yamaha for new pedestals.
 
My AR Capt. seat was really sloppy feeling as well....does your passenger seat make any noise?
 
Mine don't creak if I tighten down the swivel knob.
 
@Kane The video that I last posted was from the passenger's seat. I didn't want the dealership to give me the "Well sir, you weigh 220 lbs, what do you expect?" My passenger seat barely gets used, and my wife, well, let's say that opposites attract; she's petite.
 
@MrMoose both of my seats are creaky and sloppy similar to the videos you posted (perhaps not as bad) and my my swivel knobs are tightened down as well. Have you taken the pedestal off the floor to see how the pole is connected to the base? Sounds like a metal on metal noise so wondering if it is a compressed tongue and grove. If you look at the base you see the indented ring and if you look at the top of the pole you see the same so they may make the same grove on the bottom of the pole as well at the same time and then press the pole into the base or something similar. If this is the case I will take mine to a buddy and have them welded from underneath and then have him help me test them on the water.
 
Mainah said:
@MrMoose both of my seats are creaky and sloppy similar to the videos you posted (perhaps not as bad) and my my swivel knobs are tightened down as well. Have you taken the pedestal off the floor to see how the pole is connected to the base? Sounds like a metal on metal noise so wondering if it is a compressed tongue and grove. If you look at the base you see the indented ring and if you look at the top of the pole you see the same so they may make the same grove on the bottom of the pole as well at the same time and then press the pole into the base or something similar. If this is the case I will take mine to a buddy and have them welded from underneath and then have him help me test them on the water.
Click to expand...
@Mainah , I have not removed the base from the floor. My dealer told me that the two pieces were welded, but I wouldn't be surprised is it's some type of a compression fitting. Bottom line is that I don't think that they should make that type of noise; it drives me crazy. I think that this should be fixed under warranty. I agree with you in that it does sound like metal to metal, rather than a creaky floor. My dealer said that they'd try to put the warranty request into Yamaha by the end of the week. I've heard from others who have stated that their seats to not make any noise at all, and I checked out a used 2015 on my dealer's lot and it's seats did not creak at all.
 
MrMoose said:
I took a closer look at things yesterday. With my head underneath the seat, it sounded like the creaking noise was coming from the pedestal flange. The mounting screws were tight, but I torqued them an extra 20-30 degrees to see if it made a difference; no change. I removed the seat to make sure that the noise is coming from the pedestal...
Here's a video (I wonder if there are some cracked welds where the pedestal tube mates to the flange; I hope that it's not delamination in my floor.)


I asked my dealer to submit a claim to Yamaha for new pedestals.
Click to expand...

Good to see you've tracked the noise down, that's defiantly faulty and not right, like you, that would drive me crazy :confused:.
 
@MrMoose you ever get this resolved? Just noticed one of my seats is doing the same thing, and trying to figure out how to fix it.
 
MrMoose said:
The welds were cracked at the interface between the pole and the bottom flange. The fix was to replace the pedestal.
Click to expand...
That's kind of what I was afraid of. Sounds like a fall project. Any idea where to order a new pedestal or was your covered under warranty? I've got the 5 year YES so I'm assuming it will be covered under that.
 
OkieAR240 said:
That's kind of what I was afraid of. Sounds like a fall project. Any idea where to order a new pedestal or was your covered under warranty? I've got the 5 year YES so I'm assuming it will be covered under that.
Click to expand...
It was covered under warranty. Happened within the first year.
 
You must log in or register to reply here.
Back
Top