- Messages
- 13,385
- Reaction score
- 13,502
- Points
- 857
- Location
- Royal, AR
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- SX
- Boat Length
- 23
It should not
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Did we damage an engine?
- Thread starter bthessel
- Start date
It should not
bthessel
Jetboaters Lieutenant
- Messages
- 193
- Reaction score
- 128
- Points
- 162
- Location
- Lebanon, OH
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
Hmmm, so I might be over my head for fixing it myself, the impeller itself looks fine with no scratches or dings.
I took it out for some testing this morning, with the other engine at 5k rpms, putting this engine over 8k causes it to cavitate and rpm surge. With both engines up over 8k I can feel vibration in that throttle but don't get the full cavitation/rpm surge.
bthessel
Jetboaters Lieutenant
- Messages
- 193
- Reaction score
- 128
- Points
- 162
- Location
- Lebanon, OH
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
Hmm, I pulled everything apart and haven't found anything yet. Gonna pull the other side apart for comparison and see if I can spot a difference.
Seadeals
Jetboaters Admiral
- Messages
- 1,275
- Reaction score
- 1,499
- Points
- 277
- Location
- Greenville, South Carolina
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- SX
- Boat Length
- 21
I can't say for sure; but believe I would get some cavitation if running one engine at only 5k and the other at 8k due to the extra "tug" being forced on the higher rpm engine. I don't have a 230 so my max rpm is only 8k. If you feel a significant difference from before, I don't discount the issue; but I just want to make sure your aren't chasing rainbows and unnecessarily stressing yourself out. It is cool to work on these boats, so have at it, I just don't want it to ruin your summer if the boat still gets top speed. Come winter, you could refurb impellers and possibly replace the wear ring section. Depending on total hours, you might want to do both sides for a total "pump rejuvenation".
bthessel
Jetboaters Lieutenant
- Messages
- 193
- Reaction score
- 128
- Points
- 162
- Location
- Lebanon, OH
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
Ya, there is definitely a difference between the right and left engines with it, I can do the same thing with opposite engines and get no vibration or cavitating. I am not going to let it stop me from running it on the weekend but am curious what is causing it.
I did get the bilge pump fixed today, pulling it out and spinning it a little there must have been something tiny stuck in it, tested and working fine now.
Similar threads
