On the water Help User Group - Join to Help or post @HELP when you are in urgent need

[Ilmmct]

man that was frightening ... a JB Help request from @Julian that I had to read and was wondering if this guy needs help ... what on earth could I possibly bring to the table to assist him ...

 

[Glen]

man that was frightening ... a JB Help request from @Julian that I had to read and was wondering if this guy needs help ... what on earth could I possibly bring to the table to assist him ...

Was thinking the same thing

 

[Jdaniels]

I'm in. Great option to support members in need..

 

[swatski]

Me too, I’m in.
Thanks @Julian for making it easy.

—

 

[mattbaker]

Signed up! I am in!

 

[Liveto99]

Yamaha code 1 ?

 

[Liveto99]

Overheat? It normally goes away but this time it is not
Got it

 

[Liveto99]

I’m good again

 

[Julian]

Yamaha code 1 ?

Error code 1 = no malfunction

https://jetboaters.net/threads/engine-lights-flashing-at-you-wonder-what-that-is-error-codes.83/

Perhaps they've changed them!

 

[FLBulldogger]

Count me in! Great idea!

 

[31BVeteran]

[USERGROUP=9]@HELP[/USERGROUP] anyone know what Would cause this? Sucked up some wood, but it wasn’t wedged in between the impeller and pulled out easily.

 

[Julian]

[USERGROUP=9]@HELP[/USERGROUP] anyone know what Would cause this? Sucked up some wood, but it wasn’t wedged in between the impeller and pulled out easily.

Probably caused cavitation and an over heat on that engine. Start and stop the engine 3-5 times in a row and see if the error clears.

 

[31BVeteran]

Probably caused cavitation and an over heat on that engine. Start and stop the engine 3-5 times in a row and see if the error clears.

tried that, Engine light still active. I have water coming out of both pissers

 

[31BVeteran]

@Julian just to make sure I’m doing it correctly, should I rapidly turn it on then immediately turn it off, rinse and repeat 4 more times?

 

[4x15mph]

Might be one of the many sensors. We have heard of those going bad. Can you get a reading on the temp of the engine on both sides using an IR thermometer and do a comparison? I am sure you have a YES warranty but this may be easier to fix at home

 

[F.M.]

@Julian just to make sure I’m doing it correctly, should I rapidly turn it on then immediately turn it off, rinse and repeat 4 more times?

Nope. Start it and shut it down. Complete engine cycles.

 

[Julian]

@Julian just to make sure I’m doing it correctly, should I rapidly turn it on then immediately turn it off, rinse and repeat 4 more times?

You want the connext screen to fully start up and be operational.

 

[31BVeteran]

Nope. Start it and shut it down. Complete engine cycles.

Yep, so I did that a couple times but no luck

 

[31BVeteran]

You want the connext screen to fully start up and be operational.

Boat was fully powered on and I had the operational engine on wake mode

 

[31BVeteran]

Might be one of the many sensors. We have heard of those going bad. Can you get a reading on the temp of the engine on both sides using an IR thermometer and do a comparison? I am sure you have a YES warranty but this may be easier to fix at home

I extended the YES warranty an extra 2 years, but it’s a 2019 so I’m hoping this falls under the warranty