• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

(Seadek installed) Got the layout sent in for my custom seadek

Just one word. Amazing. Looks so legit compared to carpet. I showed the wife. We may have this project in our near future.
 
Would it be an exact match to the grey stuff I already have on swim platform of my 2015 SX 210 or would I need to re-do the swim platform also to match?
 
Last edited:
NewBoater said:
Would it be an exact match to the grey stuff I already have on swim platform of my 2015 SX 210 or would I need to re-do the swim platform also to match?
Click to expand...
It is fairly close. I was told that it will darken up to match once it starts to get some sun and water on it.
 
If you have time would you mind posting a pic standing from swim platform if you can get swim platform and some of the other into one pic to see difference. Also would you mind posting a pic of bow pieces up front. Thanks!
 
@BlackandTan yes that could be done. Not many have asked for it so we never added it to the kit.
 
@JetBoatPilot I plan on jumping in on the group buy for a cockpit kit and have been wondering if strips next to the gas tank lid could be added too. Main benefit I see is it will cover the carpet snap holes in that area.

Should we just add this to the request when ordering ?
 
Yes @Pullen724 that will be fine. We will just need the dimensions, length and width.
 
The solid sections look so much better than mine! Looks great. Congrats!
 
We would be glad to sell kits for $900 each and cut the pads without the part breaks, but to try to make the price as affordable as possible we opted to break the parts for max yield per sheet which helped us keep the kit prices lower.

His kit was likely 3 full sheets of material whereas ours is 2.5 on the same boat. That half sheet savings is where we justify the price break.
 
JetBoatPilot said:
@BlackandTan yes that could be done. Not many have asked for it so we never added it to the kit.
Click to expand...
I have a '14 242 ls, please let me know how to go about ordering. I can call the JBP number, just need to know if there is a part number or a specific description. Thanks!
 
@BlackandTan call my office today at 850-867-1410 and we'll get you setup. Thanks!
 
You must log in or register to reply here.

Similar threads

J
REPLACEMENT CONSOLE PANEL FOR 255fsh
    • Like
Replies
10
Views
117
jdmpwrd1
J
C
Boat 2010 212x for sale NC
Replies
7
Views
662
csmacken
C
brontvain
Scarab 165 depth finder question
2
Replies
20
Views
721
Divouneh
Divouneh
P
Boat 2014 AR192 $18k Florida
Replies
0
Views
116
Psgrin
P
Dshriber
Replacement SeaDek FSH 210
Replies
0
Views
446
Dshriber
Dshriber
Back
Top