-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Wakeboard rack mounting on AR195
- Thread starter mdchachi
- Start date
QuakeTen
Jet Boat Addict
- Messages
- 31
- Reaction score
- 26
- Points
- 87
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR195
- Boat Length
- 19
I picked up a Monster Tower Universal with Swivel and ordered a 1 7/8 back during a Xmas sale. I planned to attach to the rear tube on the starboard side. That size certainly doesn’t fit.
Now, I’m not sure if I should try building up the rear some and use no insert or try another size. Any advice? I’d like to get this thing mounted finally.
Thanks.
Now, I’m not sure if I should try building up the rear some and use no insert or try another size. Any advice? I’d like to get this thing mounted finally.
Thanks.
DavisAR195
Jetboaters Lieutenant
- Messages
- 685
- Reaction score
- 708
- Points
- 167
- Location
- Happy Valley, Or
- Boat Make
- MasterCraft
- Year
- 2019
- Boat Model
- Other
- Boat Length
- 22
There are two different sizes, one is 1 7/8 the other is 2 3/8.
QuakeTen
Jet Boat Addict
- Messages
- 31
- Reaction score
- 26
- Points
- 87
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR195
- Boat Length
- 19
Thanks.
With the powder coat on the 1 7/8, the Monster Tower 1 7/8 insert doesn't quite fit. I called them yesterday and they were super helpful and are sending me the 2" insert to use on the 1 7/8 rear tube. I read in a separate thread on this forum that folks are using the 2" from Monster with rubber fusion tape to give the tube a little extra diameter to hold firm on the 2" insert. Monster indicated that regular electrical tape would work too.
fvcoachv
Jet Boat Addict
- Messages
- 93
- Reaction score
- 122
- Points
- 102
- Location
- Huntington Beach, CA
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- AR
- Boat Length
- 19
I really like the no graphics look! I am on the fence with pulling mine off.
hokiesax
Active Member
- Messages
- 24
- Reaction score
- 3
- Points
- 42
- Boat Make
- SeaDoo
- Year
- 2006
- Boat Model
- Wake
- Boat Length
- Other
Just received the 1 7/8 Yamaha specific racks from bulletlines.com: Yamaha Wakeboard Racks AR190, AR192, AR195, AR210, 212 Limited S, 212X, AR230 HO, AR240 HO, 242 Limited S, 242X, and all E Series
It actually comes with three different rubber inserts so it will fit either the front or back tube perfectly!
It actually comes with three different rubber inserts so it will fit either the front or back tube perfectly!
Chris D
Jet Boat Addict
- Messages
- 128
- Reaction score
- 121
- Points
- 122
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 19
I have no complaints on my set.
Teledatageek
Jet Boat Addict
- Messages
- 54
- Reaction score
- 20
- Points
- 107
- Location
- Rochester, NY
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- 195S
- Boat Length
- 19
Any suggestions for a single wakesurf board rack for a 2020, 212S? Also wondering what the be the best color with the gray tower? Didn't think we would need one but sure is a pain to the have the board in the cabin! Hoping to get one ASAP.
Thanks!
Thanks!
Similar threads
