was excited about my SeaDek install until...

[jameskeller76]

The second locker piece is wrong. Appears to be from another model. Was super excited to get this ready for the weekend. Already emailed Will but super disappointing.

 

[Julian]

He'll get you the right piece pretty quickly...no worries!

 

[jameskeller76]

He'll get you the right piece pretty quickly...no worries!

I'm sure he will, i was on a roll and it really took the wind out of my sails. Mistakes happen but still bummed.

 

[Evil Sports]

Thats a WTF moment fo sho

 

[MattFX4]

That piece must of been cut on a Friday afternoon.

 

[haknslash]

@jameskeller76 Looks like you were shipped a 19' ski locker piece by mistake as those are the exact black lines and pattern on my new SeaDek for my AR192. Take a look and my ski locker pattern seems identical https://jetboaters.net/threads/loving-the-seadek-kit.11575/. I'm envious of the extra width you 21' and 24' guys get in the middle of the boat

I'm sure they will get you sorted asap.

 

[Bruce]

@JetBoatPilot's customer service is above and beyond. He will take care of you!

 

[jameskeller76]

@JetBoatPilot's customer service is above and beyond. He will take care of you!

I know they will. Like I said mistakes happen, just a little inconvenient being that we are going out on the lake this weekend.

 

[jameskeller76]

That piece must of been cut on a Friday afternoon.

Ha! Funny you say because these did ship last Friday

 

[jameskeller76]

Already received an email from JBP stating they are shipping the new piece out today.

 

[JetBoatPilot]

@jameskeller76 I am sorry about that. I had my shop foremen who oversees all production out last Friday for his son's wedding. The number 2 guy had several mistakes that we did catch that day. I guess yours was not as easy to catch as the others. We have spoken with him we hope that this won't happen again. Why don't you hold on to the piece you have and cut it up for optional pads or generic use? I know its not much consolation but you will find 1001 uses for this stuff once you start looking.

 

[96Pirate]

The second locker piece is wrong. Appears to be from another model. Was super excited to get this ready for the weekend. Already emailed Will but super disappointing.

@jameskeller76. So should the 1st locker piece have the radius done to the inside (bottom) corners? The jobs that I have looked at where there are 2 pieces for the locker have square corners where the 2 pieces meet and a radius on the outside corners. Maybe your model is different. But the incorrect piece you received has square corners and that matches haknslash's job.

 

[Bruce]

But the incorrect piece you received has square corners and that matches haknslash's job.

The incorrect piece that he received appears to be intended for a 190 or 192. They are narrower boats and must have a narrower ski locker.

JBP already shipped the correct piece.

 

[LBFloats]

@jameskeller76 Why don't you hold on to the piece you have and cut it up for optional pads or generic use? I know its not much consolation but you will find 1001 uses for this stuff once you start looking.

Makes an excellent wrap for your 50 gallon Yeti Rambler coffee mug

 

[96Pirate]

The incorrect piece that he received appears to be intended for a 190 or 192. They are narrower boats and must have a narrower ski locker.

JBP already shipped the correct piece.

Yep, just pointing out the difference in the corners...radius vs square.

 

[subysti]

I guess the guy that shipped them really was the "number 2" guy

 

[haknslash]

I'd cut that piece up and use it for some pieces along the top of the trailer, I messaged Will to see if he offered anything like that as I'd love to have some silver brushed pieces for the top front half of my trailer frame since I launch solo.

 

[TheGreekTitan]

Mistakes happen. As a business owner myself, I know this. It's what the business does to right the wrong that matters.

Seems to me @JetBoatPilot is doing the absolute right thing as a business man. Can't ask for any more. Good job Will.

 

[jameskeller76]

Mistakes happen. As a business owner myself, I know this. It's what the business does to right the wrong that matters.

Seems to me @JetBoatPilot is doing the absolute right thing as a business man. Can't ask for any more. Good job Will.

Yup, totally took care of me quickly ! I'll be buying thrust vectors from JBP next

 

[jameskeller76]

Just one piece to go!