Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Now that I see your entire deck I just want to call out the 1st locker piece you put down. Maybe the locker pieces are different from the others but I don't think the piece you put down should have the radius done on the edge that would adjoin to the missing piece. Look at where your 2 pieces on the fuel tank cover meet...they are squared. Same with the 2 pieces in the bow. Like I said maybe the storage locker is done differently from the rest of the boat.
Now that I see your entire deck I just want to call out the 1st locker piece you put down. Maybe the locker pieces are different from the others but I don't think the piece you put down should have the radius done on the edge that would adjoin to the missing piece. Look at where your 2 pieces on the fuel tank cover meet...they are squared. Same with the 2 pieces in the bow. Like I said maybe the storage locker is done differently from the rest of the boat.
I'd cut that piece up and use it for some pieces along the top of the trailer, I messaged Will to see if he offered anything like that as I'd love to have some silver brushed pieces for the top front half of my trailer frame since I launch solo.
I believe they do that because if they squared it off the piece next to the latch would be a point and would likely catch and pull up easily. Perhaps @JetBoatPilot can confirm.
I noticed your front cockpit pieces came in two separate pieces. I wonder why mine came in 3 separate pieces? Don't particularly like it but I guess it's ok. Would prefer one piece!
@Mark it's due to the sheet sizes that we cut from and the offered price point. We could cut those pads from one piece but the cost of the kit would be higher as we would have to get into another sheet of material to make that happen.
