• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

YDS Software and cable - May I borrow?

I got the software and cable. Can someone help me find the diagnostic ports? I saw in previous threads it was mentioned the ports are under some panel in the starboard side storage? I don't see anything. I have a 2006 AR210.
On my 04 ar230 is behind the screw port on the aft vertical wall of the starboard aft hatch.
 
YDS Plug1.jpg

I unplug these and hook up to these plugs
 
Thanks for everyone's help. I got my codes read. It was an issue with the No Wake switch. I swapped out all my switches for new ones with fancy red LEDs and text. Apparently the original No Wake switch has a resistor inside of it, so I am going to have to rig something up on my new switch.

I found some old threads on "the other site" regarding making one of these diagnostic cables. I ordered the parts to give it a shot. Hey @AZDANSX230HO - when do you need your stuff back by? I was hoping I could use your cable as a guide (so I know which color wires to connect) and test my newly made cable with your software whenever my parts come. But if you need it back ASAP, I'll go ahead and send it. I suppose I could just take a picture of your cable or something...
 
Thanks for everyone's help. I got my codes read. It was an issue with the No Wake switch. I swapped out all my switches for new ones with fancy red LEDs and text. Apparently the original No Wake switch has a resistor inside of it, so I am going to have to rig something up on my new switch.

I found some old threads on "the other site" regarding making one of these diagnostic cables. I ordered the parts to give it a shot. Hey @AZDANSX230HO - when do you need your stuff back by? I was hoping I could use your cable as a guide (so I know which color wires to connect) and test my newly made cable with your software whenever my parts come. But if you need it back ASAP, I'll go ahead and send it. I suppose I could just take a picture of your cable or something...

If you could send it back sometime next week would be good, need to get my boat ready for the season. We are flying home from Hawaii this Friday.
 
Okay. I will send it out Monday at the latest. Thanks!
 
Do any members near Columbus Ohio have the cable and software I could borrow?
 
Back
Top